![]() dst-nat - redirects data from the external network to the local, internal (select this option).add-src-to-address-list the outgoing address is added to the corresponding address list.add-dst-to-address-list the destination address is added to the address list.In the Action field, we prescribe the action that the router will have to perform. interface (outgoing interface) - the connection interface of the computer for which we are doing port forwarding. If we are connected to the provider via pppoe, then it may be necessary to specify it, and not the WAN interface. The parameter must be specified, otherwise the port will not be accessible from the local network. In our case, since we are doing a forwarding to receive data from the outside, this is the interface through which the router is connected to the Internet, by default this is the ether1-gateway. interface (incoming interface) - here we specify the interface of the MikroTik router on which it is used, "listens" this port. Port(any port) - if we put the port number here, we will indicate to the router that this port will be used both as outgoing and incoming (combining the two previous fields in one). ![]() Port (destination port) - we put down the number of the external port of the router, to which data from the remote machine will come and be forwarded to our computer on the internal network. Port(outgoing port) - the port of the remote computer from which the data will be sent, we leave empty if it does not matter to us. ![]()
0 Comments
Leave a Reply. |